Inspira Blindhem Foot for Husqvarna and Pfaff Overlockers (620117096) HMI 1‚500 stitches per minute

1‚500 stitches per minute

Almost all utility or decorative stitches (stitches with a default stitch width wider than 9 mm‚ and stitches with backward feeding cannot be used) can be used when stitching with this attachment so you are free to use your favorite

5cm (approx 6in x 5in)

Stitch Types

Supertwist Glamour is MADEIRA's exclusive "Metallic Effect" thread used by famous designers and fashion houses everywhere

Inspira Blindhem Foot for Husqvarna and Pfaff Overlockers (620117096) HMI 1‚500 stitches per minuteInspira Blindhem Foot for Husqvarna and Pfaff Overlockers (620117096). This foot is for sewing cuffs on knit fabrics and hemming where seam should not be visible. Preparing the machine Needle: Right needle Stitch type: Three thread overlock or three thread flatlock Stitch length: 4 5mm Differential feed lever: Normal position Upper knife: Working position Sewing Fold fabric as shown and place it under the presser foot. Loosen screw (A) and adjust edge