CM Rotor Assembly - Single Phase (Model C & F) Entertainment The Brake Hub is secured

The Brake Hub is secured to the Drive Shaft & Pinion using a Snap Ring

This bearing is installed on the Motor Shaft using 2 Snap Rings

Electric chain hoists and other electrical equipment is necessary to get our jobs done

With a shorter handle length and optimized weight

this Dead End Plate gets attached to the Chain Guide Stripper

CM Rotor Assembly - Single Phase (Model C & F) Entertainment The Brake Hub is securedThis Rotor Assembly is for Model C & F Next Gen Lodestar hoists with single phase power. When replacing a Rotor Assembly, it is also recommended that the Stator be replaced. The compatible Stators for this Rotor Assembly is part number 00000472 (50Hz power) and 00000462 (60Hz power).