Stainless Steel 3/4" Female NPT to 3/4" Female GHT Subtype - Pressure Washers I was wrong

I was wrong

The Brass 3/4" Female NPT to 3/4" Female GHT could be used to convert a male GHT hose end to a female GHT end

Another neat feature is the CGM "Continuous Ground Monitoring" system

Yellow - 1 Step or Finishing

These are meant for a harder jacket hose like the blue whip hoses I built for my reel setup here at OGHQ

Stainless Steel 3/4" Female NPT to 3/4" Female GHT Subtype - Pressure Washers I was wrongDescription This fitting is used if you want to put a 3 4" Male GHT QD plug on a 3 4" NPT male thread. We would use something like this for our stainless bucket filler hose which has 3 4" Male NPT threads. This also works great for using that same hose for an inlet hose into a pressure washer. Here would be your Flow Path if you're doing a stainless inlet hose setup: Hose Bib > 3 4" Female GHT Coupler > 3 4" Male GHT Plug > 3 4" Female GHT to 3 4"